Skip to content
Build your machine now machine builder →

For Pickleball Facilities, Clubs & Parks

Pickleball Court Cleaning Machines

Court dust is what makes a surface slick — and slick courts are how players get hurt. These scrubbers pull the grit and shoe rubber off your courts in minutes, then clean the track, cafeteria, and lobby on the same pass. Sized by how many courts you run.

Finance from

$202 / mo

Two-court machine on a 60-month term W.A.C. Larger facilities sized up from there.

Also cleans

The whole building

Walking tracks, cafeterias, lobbies, locker rooms — one machine, not one per surface.

Or call our team 877-406-8775

Mon–Fri 7:00am – 5:00pm CST

FactoryCat GTX ride-on floor scrubber cleaning an indoor pickleball court

A GTX rider working an indoor pickleball court — clean stripe behind it.

Why Courts Get Dangerous

Dust on a court is a slip hazard, not a housekeeping problem.

Pickleball courts collect a specific kind of dirt: fine grit tracked in from outside, rubber worn off shoe soles, and the dust that settles out of the air in any big open room. On a cushioned or coated surface that film acts like ball bearings — players lose their footing on lateral movement, which is exactly when ankles and knees go.

Dust mopping moves the fine stuff around and leaves the film. A floor scrubber lays down solution, works it into the surface, and vacuums the dirty water back off, so the grit leaves the building. Courts come back with grip instead of a haze, and they are dry and playable within minutes rather than closed for the evening.

The machine also pays for itself faster here than almost anywhere else, because a pickleball facility is never just courts. The same unit cleans your walking track, cafeteria and concessions, lobby, and locker rooms — surfaces you are currently paying someone to mop separately.

Kodiak walk-behind floor scrubber on an indoor pickleball court
Walk-behind scrubber on an indoor pickleball court.

On a Real Court

This is what a clean court looks like.

A walk-behind scrubber mid-shift on an indoor court. Note what is not happening: no buckets, no wet-floor cones fencing off the court, no waiting for it to air dry. The machine lays down solution, scrubs, and vacuums it back up in the same pass, so the surface behind it is clean and dry enough to play on.

That is the difference that matters to a facility running booked sessions. Cleaning stops being something you schedule around and becomes something you do between them.

Sized by Court Count

Pick the machine that matches your facility.

See Full Catalog
FactoryCat MicroMini floor scrubber for sale — the U.S.
FactoryCat

MicroMini

The MicroMini packs FactoryCat's all-steel build into its tightest footprint — a walk-behind scrubber for congested floors, aisles, and small bays.

Pricing Request a quote
FactoryCat Micro-HD floor scrubber for sale — the U.S.
FactoryCat

Micro-HD

The Micro-HD v2.1 is the compact workhorse of the FactoryCat line: 17"–28" heads, steel frame, and the same deck options as machines twice its size.

Pricing Request a quote
FactoryCat Mini-HD floor scrubber for sale — the U.S.
FactoryCat

Mini-HD

The Mini-HD v2 steps up to 26"–28" cleaning paths with 21/23-gallon tanks — mid-size productivity in a walk-behind frame.

Pricing Request a quote
FactoryCat Mag-HD floor scrubber for sale — the U.S.
FactoryCat

Mag-HD

The Mag-HD is FactoryCat's biggest walk-behind: 30"–34" paths, 35-gallon solution, 5-hour runtime. For floors that almost justify a rider.

Pricing Request a quote
FactoryCat Pilot V3 floor scrubber for sale — the U.S.
FactoryCat

Pilot V3

The Pilot V3 is the entry rider — 144,000 sq ft per shift, fits through standard doors, available in disk, cylindrical, and orbital decks.

Pricing Request a quote
FactoryCat GTX floor scrubber for sale — the U.S.
FactoryCat

GTX

The GTX rider covers up to 250,000 sq ft per charge with 33/36-gallon tanks — warehouse-scale scrubbing in a maneuverable chassis.

Pricing Request a quote

Estimated payment based on a 60-month term and subject to credit approval. Not an offer or commitment to lend; your actual rate and payment may differ.

Sizing

How many courts are you running?

Court count is the fastest way to size this. If your building also has a track or a big cafeteria, size up one step — that square footage adds up quicker than people expect.

2 Courts — Kodiak K19

A 28" cleaning path with 19-gallon tanks. The right machine for a two-court club or a school gym that converts to pickleball. Disk or cylindrical brush depending on your surface. About $202/month financed.

3–6 Courts — Kodiak K25

Our largest walk-behind: a 32" path, 25/26-gallon tanks, and about 5 hours of runtime — enough to do six courts plus the track without stopping to dump. About $216/month financed.

6+ Courts — FactoryCat GTX Rider

A ride-on covering up to 250,000 sq ft per charge with 33/36-gallon tanks. Once you are past six courts, a walk-behind operator is the bottleneck — the rider is what keeps cleaning inside one shift. About $414/month financed.

Not sure? Count the rest of the building.

Most facilities undersize because they only count courts. Add the track, cafeteria, lobby, and locker rooms, then call us — we size on total square footage and how long you have to clean it.

By Surface

Indoor courts, outdoor courts, and everything between them

The machine stays the same; the brush or pad changes. Here is what that means for each surface in a pickleball facility.

Modular Sport Court Tile

Snap-together court tile has seams and texture that trap grit, and a mop just pushes it into the joints. A scrubber lifts it out and vacuums it off, which is the only way to keep the surface consistent underfoot.

Cushioned Acrylic & Coated Concrete

The most common indoor pickleball surface. Controlled moisture matters — the scrubber recovers what it lays down, so you clean the coating without soaking it or leaving standing water at the lines.

Outdoor Courts (Asphalt & Concrete)

Scrubbers wash coated outdoor courts well, and they are the fastest way to strip off pollen film, algae haze, and shoe rubber. Clear heavy leaves and debris first — for courts that collect a lot of that, ask us about pairing with a sweeper.

Tracks, Cafeterias & Lobbies

Rubber walking tracks, sealed concrete, VCT, and tile all clean on the same machine with a pad swap. This is the part that turns a court purchase into a facility purchase.

The Math

What you are paying to mop right now

Facilities usually find the machine is cheaper than the labor it replaces — before counting court downtime.

The labor line

Two hours a night, six nights a week, is roughly 620 hours a year. At $15/hour that is about $775 every month — and courts still come back hazy.

What the machine changes

A two-court facility typically cleans in 20–30 minutes. Most operators cut cleaning labor by 70–90% and get a better surface out of it.

Court time is revenue

Courts closed for cleaning are courts nobody is paying for. Because the floor dries behind the machine, cleaning stops competing with booked play.

No capital request required

Financing puts this on the monthly operating line it is already replacing. Lease-to-own is available too, applying rental payments toward the purchase.

In the Southeast?

Rent one before you buy

We sell and ship nationwide. If you are in our delivery region — Alabama, Tennessee, Mississippi, Arkansas, Louisiana, and North Florida — you can rent one first.

Try it on your own courts

Rent a scrubber for a week and run it on your actual surface before committing. On cushioned and coated courts especially, seeing it on your own floor settles the question.

Lease-to-own

Decide to keep it and your rental payments apply toward the purchase, so the trial costs you nothing extra. See rental rates.

How It Works

From phone call to clean courts — four steps.

  1. 01

    Count your courts

    Court count, surface type, and whether the building also has a track, cafeteria, or lobby to cover.

  2. 02

    We size it

    We match deck width, tank size, and brush or pad to your surfaces and your cleaning window — not just the biggest machine we sell.

  3. 03

    Finance it

    Apply through our credit application, or start with a rental and apply the payments toward the purchase.

  4. 04

    We ship and support it

    Shipped nationwide with the right brushes and pads, plus parts and phone support for the life of the machine.

Common Questions

Pickleball court cleaning — FAQs

What is the best way to clean a pickleball court?

A walk-behind or ride-on floor scrubber sized to your court count. It applies solution, works it into the surface, and vacuums the dirty water back up — so the grit and shoe rubber leave the building instead of being pushed around by a dust mop. Courts are dry and playable within minutes.

What size machine do I need for my facility?

By court count: 2 courts → Kodiak K19 (28" path). 3–6 courts → Kodiak K25 (32" path, ~5 hr runtime). More than 6 courts → FactoryCat GTX rider. If you also clean a track or cafeteria, size up one step.

Will a scrubber damage cushioned or sport court surfaces?

No, when the right pad or brush is used — and we spec that for your specific surface before it ships. The greater risk is the opposite: ground-in grit abrades cushioned acrylic and wears the texture off court tile, which shortens the time until you have to recoat.

Can I use it on outdoor courts?

Yes. Scrubbers clean coated asphalt and concrete courts well and are the fastest way to remove pollen film, algae haze, and shoe rubber. Clear heavy leaves and debris first — if your courts collect a lot of that, ask us about pairing the scrubber with a sweeper.

How long does it take to clean the courts?

A two-court facility typically runs 20–30 minutes. Larger facilities scale with the machine — that is exactly why we size by court count rather than selling one model to everyone.

Can one machine clean the courts and the rest of the building?

Yes, and that is usually what justifies the purchase. The same machine cleans walking tracks, cafeterias, lobbies, and locker rooms with a pad swap. Facilities that only price it against court cleaning tend to undersize the machine.

What does it cost per month?

Financed over 60 months: roughly $202/month for the two-court machine, $216/month for 3–6 courts, and $414/month for the 6+ court rider. Payments are estimates subject to credit approval; freight is quoted separately. Call 877-406-8775 for purchase pricing.

Do you ship nationwide?

Yes — we sell and ship anywhere in the United States. Rentals are limited to our delivery region (Alabama, Tennessee, Mississippi, Arkansas, Louisiana, and North Florida), where you can rent before you buy.

Tell us how many courts you run — we'll size it in two minutes.

Call 877-406-8775

Get a Rental Quote

Tell us about your job and we'll get right back to you.

Submit Order Request

Tell us what you're after and we'll follow up shortly.

Schedule a Demo

See the equipment in action at your facility.