As seen on WhistlinDiesel
The WhistlinDiesel Shop Scrubber
He called it the Kodiak 70,000.
It is a Kodiak K16-28D — the exact machine he keeps in his shop. Real price, real specs, and yes, you can put one in yours.
Kodiak K16-28D
28-inch disk deck, traction drive. Not seventy thousand dollars.
$191 / mo
60-month term with approved credit. Sticker is $9,094.

What You Actually Saw
One pass. Wet, scrubbed, and dry behind it.
It is not a pressure washer and it is not a shop vac. It does three things at once: lays clean water and soap down, drives a brush into the concrete under real weight, then sucks the dirty water straight back up behind it. The floor is clean and dry about four seconds after it goes by.
No floor drain required — and that is the part most people miss. The water leaves in the tank, not across your slab. If you have ever tried to pressure wash inside a shop and then spent an hour pushing the mess toward a roll-up door, that is the problem this solves.
Tire marks, brake dust, grinder dust, red clay off the truck, the film that builds up around the lift — it pulls all of it off the floor and into a tank you dump. That is why it looks so good on camera. You are watching a nasty floor turn clean in one straight line, with no mop and no puddle left over.
- 28" cleaning path
- 16 gal solution + 16 gal recovery tanks
- 250 lb capacity scrubdeck actuator
- 24V system, 130AH batteries, onboard charger
- 3/16" steel powder-coated frame
- Traction drive — it pulls itself, you steer

When's the last time cleaning your shop made you smile like that?
That's him with the one he kept. He is not going back to a mop.
So why does it cost nine grand?
Fair question. We would rather answer it than dodge it.
It is built out of steel
3/16-inch powder-coated steel frame, not moulded plastic. It gets backed into things, loaded on a trailer, and run by whoever happens to be holding it. The plastic ones crack at the deck mount about year two.
The batteries are most of it
Two 130AH wet cells and an onboard 24V charger are a meaningful chunk of the price on any battery machine. That is what buys you a full run time instead of twenty minutes.
Picking the water back up
Putting water on a floor is easy — a garden hose does that. Getting all of it back off, through a curved squeegee and a sealed vacuum path into a 16-gallon tank that does not stink a week later, is the part you are actually paying for.
You can fix it
Brushes, pads, squeegee blades, batteries — all wear items, all with part numbers, all on our shelf. This is a machine you keep for ten years and rebuild, not one you throw away when something wears out.
Which one do you actually need?
The K16 is the one from the video. That does not automatically make it the right one for your building.
Not sure? Tell us how big the building is and what is on the floor, and we will tell you which one fits — including when the cheaper one is the right call.
Want to see what else we can do?
The K16 is one machine out of a yard full of them. We rent, sell, and service scrubbers, sweepers, floor scrapers, and surface prep gear — from a walk-behind for the shop to a rider that eats a warehouse.
Still after the Kodiak 70,000? Get your price or call 877-406-8775.
Questions people are asking
What is the machine in the video actually called?
A Kodiak K16 — the 28-inch traction-drive disk model, part number K16-28D. The "Kodiak 70,000" is a bit.
How much does it cost?
The K16-28D is $9,094. Financed over 60 months that works out around $191 a month with approved credit. Smaller decks in the same family start lower — the 20-inch pad-assist model is $6,426.
Can a regular guy buy one, or do I need a business?
Anybody can buy one. No business account, no licence, no dealer network nonsense. Plenty of these go into private shops and barndominiums — people who built a nice floor and got tired of mopping it.
Do you ship outside the Southeast?
Yes — we ship machines anywhere in the United States. Freight is quoted separately once we know where it is going. Our rental fleet is Southeast-only, but sales are nationwide.
Will it get tire marks and oil off my shop floor?
Tire marks, brake dust, grinding dust, red clay, spilled coolant, and the general film that builds up on a working floor — yes. Fresh oil and grease come up with the right pad and a degreaser; a puddle that has been soaking into bare concrete for two years is a different conversation. Epoxy, sealed concrete, polished concrete, and bare concrete are all fair game.
Do I need a floor drain?
No — and that is the whole point. The machine takes its water back with it, so nothing runs across your floor looking for a drain. You dump the dirty tank in a utility sink, a toilet, or outside. Most shops do not have a drain, which is exactly why mopping and pressure washing are such a miserable option indoors.
How long does it take to do a shop?
A 40x60 building is about 2,400 square feet. With a 28-inch path you are looking at roughly fifteen or twenty minutes of actual driving, plus filling and dumping. The batteries will run several hours, so run time is not what limits you — getting the side-by-side out of the way is.
What about parts and service later?
We are an authorized Kodiak dealer and we stock brushes, pads, squeegees, batteries, and chargers. Our own technicians service these machines, and when you call for help you get somebody who works on them, not a call centre.
